dmesg - AMD FX-8150 Eight-Core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.10-1.28-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Mon Feb 3 14:11:15 UTC 2014 (c9a2c6c)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-990FXA-UD5/GA-990FXA-UD5, BIOS F12 10/03/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000022f000000 aka 8944M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4cd0-0x000f4cdf] mapped at [ffff8800000f4cd0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xcfd9ffff]
[mem 0x00000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfd9ffff] page 4k
kernel direct mapping tables up to 0xcfd9ffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22effffff]
[mem 0x100000000-0x1ffffffff] page 1G
[mem 0x200000000-0x22effffff] page 2M
kernel direct mapping tables up to 0x22effffff @ [mem 0xcfd9e000-0xcfd9ffff]
RAMDISK: [mem 0x32bea000-0x355ecfff]
ACPI: RSDP 00000000000f6bf0 00014 (v00 GBT )
ACPI: RSDT 00000000cfdd1000 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfdd1100 07997 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfda0000 00040
ACPI: MSDM 00000000cfdd8b80 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cfdd8c00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdd8c40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 00000000cfdd8cc0 00740 (v01 GBT 00000000 00000000)
ACPI: MATS 00000000cfdd9400 00034 (v01 GBT 00000000 00000000)
ACPI: TAMG 00000000cfdd9470 00182 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cfdd8ac0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 00000000cfdd9600 066BA (v01 MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 00000000cfddfd30 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
Initmem setup node 0 [mem 0x00000000-0x22effffff]
NODE_DATA [mem 0x22efec000-0x22effffff]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880226600000-ffff88022d7fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x00097fff]
node 0: [mem 0x00100000-0xcfd9ffff]
node 0: [mem 0x100000000-0x22effffff]
On node 0 totalpages: 2092328
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3914 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832984 pages, LIFO batch:31
Normal zone: 16968 pages used for memmap
Normal zone: 1224120 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfda0000 - 00000000cfdd1000
PM: Registered nosave memory: 00000000cfdd1000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88022ec00000 s81856 r8192 d20544 u262144
pcpu-alloc: s81856 r8192 d20544 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061018
Policy zone: Normal
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ c4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
Memory: 8062912k/9158656k available (5771k kernel code, 789344k absent, 306400k reserved, 5183k data, 992k init)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
NR_IRQS:33024 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3624.326 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7248.65 BogoMIPS (lpj=3624326)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8150 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (57989.21 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
RTC time: 20:08:51, date: 03/17/14
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0xD2, should be 0xD1 (20120913/tbutils-324)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1200] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xdc000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e0c] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xfd1f8000-0xfd1fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [1b4b:917a] type 00 class 0x01018f
pci 0000:03:00.0: reg 10: [io 0xcf00-0xcf07]
pci 0000:03:00.0: reg 14: [io 0xce00-0xce03]
pci 0000:03:00.0: reg 18: [io 0xcd00-0xcd07]
pci 0000:03:00.0: reg 1c: [io 0xcc00-0xcc03]
pci 0000:03:00.0: reg 20: [io 0xcb00-0xcb0f]
pci 0000:03:00.0: reg 24: [mem 0xfdbff000-0xfdbff1ff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
pci 0000:04:0e.0: reg 14: [io 0xbf00-0xbf7f]
pci 0000:04:0e.0: supports D2
pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
pci 0000:05:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 10: [mem 0xfd8f8000-0xfd8fffff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:07:00.0: [1b4b:917a] type 00 class 0x01018f
pci 0000:07:00.0: reg 10: [io 0x8f00-0x8f07]
pci 0000:07:00.0: reg 14: [io 0x8e00-0x8e03]
pci 0000:07:00.0: reg 18: [io 0x8d00-0x8d07]
pci 0000:07:00.0: reg 1c: [io 0x8c00-0x8c03]
pci 0000:07:00.0: reg 20: [io 0x8b00-0x8b0f]
pci 0000:07:00.0: reg 24: [mem 0xfd6ff000-0xfd6ff1ff]
pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:00.0: PME# supported from D3hot
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.2: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfd4fffff]
pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: [mem 0xd0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x004d]
pnp 00:01: [io 0x0050-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0220-0x0225]
pnp 00:01: [io 0x0290-0x0294]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0220-0x0225] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0900-0x091f]
pnp 00:02: [io 0x0228-0x022f]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c52]
pnp 00:02: [io 0x0c6c-0x0c6d]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cdf]
pnp 00:02: [io 0x0800-0x08fe]
pnp 00:02: [io 0x0a10-0x0a17]
pnp 00:02: [io 0x0b00-0x0b0f]
pnp 00:02: [io 0x0b10-0x0b1f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [mem 0x00000000-0x00000fff window]
pnp 00:02: [mem 0xfee00400-0xfee00fff window]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:07:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:02: [io 0x0900-0x091f] has been reserved
system 00:02: [io 0x0228-0x022f] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c52] has been reserved
system 00:02: [io 0x0c6c-0x0c6d] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x08fe] has been reserved
system 00:02: [io 0x0a10-0x0a17] has been reserved
system 00:02: [io 0x0b00-0x0b0f] has been reserved
system 00:02: [io 0x0b10-0x0b1f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [mem 0xe0000000-0xefffffff]
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000d5c00-0x000d7fff]
pnp 00:0a: [mem 0x000f0000-0x000f7fff]
pnp 00:0a: [mem 0x000f8000-0x000fbfff]
pnp 00:0a: [mem 0x000fc000-0x000fffff]
pnp 00:0a: [mem 0xcfda0000-0xcfdfffff]
pnp 00:0a: [mem 0xffff0000-0xffffffff]
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x00100000-0xcfd9ffff]
pnp 00:0a: [mem 0xcfe00000-0xcfefffff]
pnp 00:0a: [mem 0xcff00000-0xcfffffff]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xfff80000-0xfffeffff]
pnp 00:0a: disabling [mem 0x000d5c00-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:0a: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:0a: [mem 0xcfda0000-0xcfdfffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:0a: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd807ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfd100000-0xfd1fffff]
pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfd200000-0xfd20ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 03]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:0a.0: bridge window [mem 0xfd200000-0xfd2fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [io 0x9000-0x9fff]
pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:07:00.0: BAR 6: assigned [mem 0xfd500000-0xfd50ffff pref]
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.2: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:15.2: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3: bridge window [io 0x7000-0x7fff]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfd4fffff]
pci 0000:00:15.3: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:03: resource 2 [mem 0xfd200000-0xfd2fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:04: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:07: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xfd400000-0xfd4fffff]
pci_bus 0000:08: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 43020k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1395086930.929:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15960
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ahci 0000:03:00.0: irq 40 for MSI/MSI-X
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m512@0xfdbff000 port 0xfdbff100 irq 40
ata6: SATA max UDMA/133 abar m512@0xfdbff000 port 0xfdbff180 irq 40
ahci 0000:07:00.0: irq 41 for MSI/MSI-X
ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xfd6ff000 port 0xfd6ff100 irq 41
ata8: SATA max UDMA/133 abar m512@0xfd6ff000 port 0xfd6ff180 irq 41
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.10-1.28-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.10-1.28-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.10-1.28-desktop ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.10-1.28-desktop ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.10-1.28-desktop ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.10-1.28-desktop ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.10-1.28-desktop ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata4.00: ATAPI: PIONEER BD-RW BDR-206D, 1.04, max UDMA/100
ata4.00: configured for UDMA/100
ata3.00: ATAPI: PIONEER DVD-RW DVR-219L, 1.02, max UDMA/100
ata3.00: configured for UDMA/100
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
PM: Checking hibernation image partition /dev/disk/by-id/ata-Corsair_Force_3_SSD_11376506000010682485-part1
ata1.00: ATA-8: Corsair Force 3 SSD, 1.3, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Corsair Force 3 1.3 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
scsi 1:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-219L 1.02 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-206D 1.04 PQ: 0 ANSI: 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 6:445:144
ata_port ata1: hash matches
ata1: hash matches
acpi device:15: hash matches
rtc_cmos 00:05: setting system clock to 2014-03-17 20:08:53 UTC (1395086933)
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 364k freed
Freeing unused kernel memory: 108k freed
scsi8 : pata_atiixp
scsi9 : pata_atiixp
ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
rdac: device handler registered
alua: device handler registered
emc: device handler registered
hp_sw: device handler registered
systemd-udevd[153]: starting version 195
ACPI: acpi_idle registered with cpuidle
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.10-1.28-desktop xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.7.10-1.28-desktop xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usb 3-1: new high-speed USB device number 2 using ehci_hcd
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:06:00.0: irq 43 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.7.10-1.28-desktop xhci_hcd
usb usb10: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.7.10-1.28-desktop xhci_hcd
usb usb11: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 3624.181 MHz
Switching to clocksource tsc
usb 3-1: New USB device found, idVendor=058f, idProduct=6364
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Mass Storage Device
usb 3-1: Manufacturer: Generic
usb 3-1: SerialNumber: 058F63646476
hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:16.2-1/input1
usb 3-2: new high-speed USB device number 3 using ehci_hcd
usb 3-2: New USB device found, idVendor=1a40, idProduct=0101
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: USB 2.0 Hub
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 5-2: new low-speed USB device number 2 using ohci_hcd
usb 5-2: New USB device found, idVendor=0764, idProduct=0501
usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 5-2: Product: UPS CP1000AVRLCD
usb 5-2: Manufacturer: CPS
hid-generic 0003:0764:0501.0002: hiddev0,hidraw1: USB HID v1.10 Device [CPS UPS CP1000AVRLCD] on usb-0000:00:13.0-2/input0
xor: automatically using best checksumming function:
avx : 13108.000 MB/sec
raid6: sse2x1 4867 MB/s
raid6: sse2x2 9402 MB/s
raid6: sse2x4 12761 MB/s
raid6: using algorithm sse2x4 (12761 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded
PM: Marking nosave pages: [mem 0x00098000-0x000fffff]
PM: Marking nosave pages: [mem 0xcfda0000-0xffffffff]
PM: Marking nosave pages: [mem 0xc4000000-0xc7ffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
usb 5-4: new full-speed USB device number 3 using ohci_hcd
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
usb 5-4: New USB device found, idVendor=062a, idProduct=3633
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: Full-Speed Mouse
usb 5-4: Manufacturer: Full-Speed Mouse
input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-4/5-4:1.0/input/input0
hid-generic 0003:062A:3633.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:13.0-4/input0
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dCorsair_Force_3_SSD_11376506000010682485\x2dpart1.device...
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dST2000DL003\x2d9VT166_5YD3KKFJ\x2dpart1.device...
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting LSB: Set default boot entry if called...
systemd-readahead[296]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Started Collect Read-Ahead Data.
systemd[1]: Started Replay Read-Ahead Data.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
systemd-udevd[331]: starting version 195
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 5-5: new low-speed USB device number 4 using ohci_hcd
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120913/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
sp5100_tco: mmio address 0xb8fe00 already in use
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:0:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 44 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900115ae000, 50:e5:49:43:eb:3e, XID 0c900800 IRQ 44
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ALSA hda_intel.c:2902 Using LPIB position fix
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
input: PC Speaker as /devices/platform/pcspkr/input/input3
ALSA hda_intel.c:1680 Enable sync_write for stable communication
Initializing USB Mass Storage driver...
scsi10 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sr1: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
microcode: CPU0: patch_level=0x06000629
ALSA patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA patch_realtek.c:1244 SKU: enable_pcbeep=0x0
ALSA patch_realtek.c:1245 SKU: check_sum=0x00000005
ALSA patch_realtek.c:1246 SKU: customization=0x000000e6
ALSA patch_realtek.c:1247 SKU: external_amp=0x0
ALSA patch_realtek.c:1248 SKU: platform_type=0x0
ALSA patch_realtek.c:1249 SKU: swap=0x0
ALSA patch_realtek.c:1250 SKU: override=0x1
ALSA hda_auto_parser.c:318 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:326 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:327 mono: mono_out=0x0
ALSA hda_auto_parser.c:330 dig-out=0x11/0x1e
ALSA hda_auto_parser.c:331 inputs:
ALSA hda_auto_parser.c:335 Rear Mic=0x18
ALSA hda_auto_parser.c:335 Front Mic=0x19
ALSA hda_auto_parser.c:335 Line=0x1a
ALSA patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
EDAC amd64: DRAM ECC disabled.
hda_intel: Disabling MSI
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ALSA hda_intel.c:2713 0000:01:00.1: Handle VGA-switcheroo audio client
ALSA hda_intel.c:1642 Enable delay in RIRB handling
microcode: CPU1: patch_level=0x06000629
microcode: CPU2: patch_level=0x06000629
microcode: CPU3: patch_level=0x06000629
microcode: CPU4: patch_level=0x06000629
microcode: CPU5: patch_level=0x06000629
microcode: CPU6: patch_level=0x06000629
microcode: CPU7: patch_level=0x06000629
microcode: Microcode Update Driver: v2.00 , Peter Oruba
firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
acpi-cpufreq: overriding BIOS provided _PSD data
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-5: New USB device found, idVendor=046d, idProduct=c315
usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-5: Product: Logitech USB Keyboard
usb 5-5: Manufacturer: Logitech
input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-5/5-5:1.0/input/input12
hid-generic 0003:046D:C315.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-5/input0
Adding 8384508k swap on /dev/sda1. Priority:-1 extents:1 across:8384508k SS
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.49 Wed Feb 12 20:42:50 PST 2014
firewire_core 0000:04:0e.0: created device fw0: GUID 00656f1c9fe59a00, S400
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
it87: Found IT8720F chip at 0x228, revision 8
it87: Routing internal VCCH to in7
it87: Beeping is supported
hwmon_vid: Unknown VRM version of your x86 CPU
scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg4 type 0
scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
sd 10:0:0:1: Attached scsi generic sg5 type 0
scsi 10:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
sd 10:0:0:2: Attached scsi generic sg6 type 0
sd 10:0:0:1: [sdd] Attached SCSI removable disk
scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 10:0:0:3: Attached scsi generic sg7 type 0
sd 10:0:0:2: [sde] Attached SCSI removable disk
sd 10:0:0:3: [sdf] Attached SCSI removable disk
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
/dev/vmmon[1189]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1189]: Module vmmon: initialized
[1205]: VMCI: shared components initialized.
[1205]: VMCI: host components initialized.
[1205]: VMCI: Module registered (name=vmci, major=10, minor=59).
[1205]: VMCI: Using host personality
[1205]: VMCI: Module (name=vmci) is initialized
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
fuse init (API version 7.20)
ppdev: user-space parallel port driver
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
systemd-journald[302]: Received SIGUSR1
nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
/dev/vmnet: open called by PID 1688 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 1695 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1698 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 1712 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
userif-3: sent link down event.
userif-3: sent link up event.
/dev/vmnet: open called by PID 1713 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 1716 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
warning: process `vmware-hostd' used the deprecated sysctl system call with 1.1.
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14820 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14830 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14866 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14902 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14940 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=14969 DF PROTO=UDP SPT=1025 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=50:e5:49:43:eb:3e:30:46:9a:13:55:41:08:00 SRC=10.10.1.1 DST=10.10.1.90 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=15041 DF PROTO=UDP SPT=1025 DPT=137 LEN=58